The shapes of flow channel molds are U-shaped, rectangular and trapezoidal, but most of them are rectangular. This shape enables it to better discharge sewage and achieve better results. Its size and shape are inseparable from the rectangle, but there are also differences. This is made according to the requirements of customers, so each prefabricated part of flow channel molds is made according to the needs of each customer, In this way, we can reflect the strictness in the process of making the flow channel mold. Whether in material selection or technology, we must strictly control and select the good original steel plate material to ensure that it is more durable in use and its surface is smoother during demoulding.
The flow channel steel mold is a large steel mold produced for the processing of rectangular flow channel cement products with a length of more than 1m. From the actual use situation, it is mainly used in Harbin, Jiamusi, Yingkou, Xinjiang and other regions. Most of them are used for farmland transformation or river regulation, which is very convenient to use. Generally speaking, when processing, They will be made according to the basic processing principles, because the rectangular chute has a large volume, and the manufacturing technology of this kind of prefabricated parts is constantly improving, and the quality of the produced prefabricated parts is also greatly improved. Therefore, at present, many projects will use rectangular chute molds, farmland irrigation or park construction Water conservancy projects and so on, often can simply the figure of this kind of mold. Similarly, it will be very convenient when using it. You can rest assured to use the rectangular flow channel mold to make large quantities.
Before processing, we will make preparations for the mold to ensure the smooth overall production. Next, we have carried out the overall grouting, and then we can start the drying of the mold through the vibration of the vibration platform. In this process, we can't let the mold come into contact with chemical materials. Workers need to check the production status of the chute mold at all times. After demoulding, the water trough will be produced. During construction, the partition around the site should also be done to avoid some injuries caused by pedestrians. After that, the prefabricated parts can be buried and reinforced.