设为首页    收藏本站

华彩光电首页
      产品列表
排水沟模具
排水渠模具
流水渠模具
排水槽模具
流水槽模具
配重块模具
拉盘模具
方涵模具
围墙板模具
流水槽钢模具
      资质荣誉
      联系我们
保定市晨泽模具制造有限公司
地址:保定市城东工业区
电话:18831266588
传真:0312-8103818
邮箱:107108222@qq.com
最新资讯

U型槽模具的使用地区及制作流程

[关闭该页][设为首页][添加收藏][发送朋友][打印][ ]

混凝土U型槽主要是运用混凝土U型槽模具来制做的,操控简易省事,对工艺的规定较低,业余施工单位也可开展。在应用前应当留意模具是不是完好无损整平,防止由于模具的难题而造成制做出的产品表层凸凹不平,牢靠度不够,进而危害排污功能,还危害耐用度,使用期遭受非常大危害,假如在应用环节中必须拆换混凝土U型槽,会给施工单位产生非常大的不便。查验开展要对模具上的淤泥开展清洁,淤泥会危害产品的品质。清洁开展后,在工作台子上将模具开展组装,组装时必须用螺钉将模具开展联接,为啥螺钉而不使用锁扣?由于模具是要多次重复使用的,锁扣的使用期要比螺钉少,不利混凝土U型槽模具长期应用。在向混凝土U型槽模具中灌料时,必须将振动棒添加到原材料中,尽可能将原材料中的空气排出来,降低产品中的汽泡,以提升产品的牢靠度,增强混凝土U型槽的承受能力,在长期的应用中,不形变,不毁坏。应用开展后要对混凝土U型槽模具开展清洁,为再次应用打好基础。

The concrete U-groove is mainly made by using the concrete U-groove mold, which is easy to operate and has low requirements on the technology, and can also be carried out by amateur construction units. Before application, we should pay attention to whether the mold is intact and leveled, so as to prevent the uneven surface of the products made by the mold due to the problem of mold, and the lack of reliability, which will endanger the sewage discharge function, also endanger the durability, and suffer great harm during the service life. If the concrete U-groove must be removed in the application link, it will cause great inconvenience to the construction unit. The inspection should be carried out to clean the sludge on the mold, which will harm the quality of the product. After cleaning, assemble the die on the workbench. When assembling, the die must be connected with screws. Why not use screws instead of lock catch? Because the mold is to be reused for many times, the service life of the lock is less than that of the screw, which is not conducive to the long-term application of the concrete U-groove mold. When filling the concrete U-shaped groove mold, the vibrator must be added to the raw materials to exhaust the air in the raw materials as much as possible, reduce the bubbles in the products, so as to improve the reliability of the products and enhance the bearing capacity of the concrete U-shaped groove. In the long-term application, it will not deform or damage. After the application, it is necessary to clean the concrete U-groove mold to lay a good foundation for the re application.

U型槽模具属于U槽模U形槽水泥模种,专业设计规格选择的U型槽的模具,其良好的,U形槽的模具生产在严格按照生产图纸,将产物成形为用于处理废水设施,有是矩形梯形,钢铁厂生产的水泥U型槽模具的使用焊接在一起,可以长期使用,并且尺寸标准,质量可靠。水泥U型槽模具设计技术进行参数以及常用U型槽模具企业主要工作尺寸为长度50厘米,上宽30-50cm ,深度30-50厘米,壁厚5-8厘米 ,两侧可以分为带沿儿或者一个不带沿儿两种。

U-shaped groove mold belongs to U-shaped groove mold, U-shaped groove cement mold, professional design specification selection of U-shaped groove mold, its good, U-shaped groove mold production in strict accordance with the production drawings, the product is formed for wastewater treatment facilities, there are rectangular trapezoid, steel plant production of cement U-shaped groove mold use welding together, can be used for a long time, and the size standard, reliable quality. Cement U-groove mold design technology parameters and commonly used U-groove mold enterprise main working size is 50 cm in length, 30-50 cm in width, 30-50 cm in depth, 5-8 cm in wall thickness, both sides can be divided into two kinds with edge or without edge.

一般U型槽模具都是可以采用预制方式进行生产,整体现浇的话我们无法通过塑造U型的效果。U形槽在预成型件的使用,通常由平坦的方式,从而使插座可以节省生产时间。U型槽模具是一种可以囊括 了多种不同型号以及企业使用技术领域的模板,该模具过去我们都是使用在水利灌溉系统工程上,现在在公路排水,高速排水、高铁等工程上都在通过使用,其具体影响大小和样式都会有专们的设计施工图纸。 采用U型槽模具采用人工预制的形式,一般U型槽的体积不是很大,人工可以搬运,拆卸,往往以50cm为主,但灌溉中使用的大U型槽,如长度3米,4米,需要使用行车,叉车等工具,这种大U型槽在东北,山东地区使用较多。

Generally, the U-shaped groove mold can be produced by prefabrication, but we can't achieve the effect of U-shaped groove mold by casting in situ as a whole. The U-shaped groove is usually used in the preform in a flat way, so that the socket can save production time. U-groove mold is a kind of template that can cover a variety of different models and the technical fields used by enterprises. In the past, we used the mold in water conservancy irrigation system engineering, but now it is used in highway drainage, high-speed drainage, high-speed rail and other projects. The specific impact size and style will have professional design and construction drawings. Generally, the volume of U-shaped groove is not very large, and it can be moved and disassembled manually. It is usually 50cm. However, the large U-shaped groove used in irrigation, such as 3M and 4m in length, needs to use tools such as traveling crane and forklift. This kind of large U-shaped groove is widely used in Northeast China and Shandong Province.


【上一个】 流水槽模具-公路流水槽模具-高铁流水槽模具厂家 【下一个】 恭贺流水槽模具厂家开工大吉


 · U型槽模具的使用地区及制作流程 · U型槽模具的运输注意事项
 · U型槽模具的核心发展 · U型槽模具按需定制--乐丰模具
 · U型槽模具的价格决定因素 · U型槽模具的基本构造及优势

水槽模具,排水槽模具,流水槽模具-保定市晨泽模具制造有限公司 |护坡砖模具|沟盖板模具|隔离墩模具|排水沟模具 |排水沟模具