The flume mold produced by our factory has made a demountable design, so when removing the mold, only need to use tools to loosen the bolts on the mold, and then the mold can be disassembled to obtain a very complete flume prefabricated parts. In the process of production, this kind of mould should be used in a scientific way, and the mould should be maintained. Although there are not many requirements for the production of the steel mould, it still needs to be maintained, because the steel mould contacts with the mud with water for a long time, and it will gradually appear aging and rusting. Let the flume die can be used for a longer period of time, while making the flume more qualified. After each use, we should clean the die. If the surface of the die has a lot of mud adhesion, and some rust occurs, we need to use cleaner and water to mix, and then make it. Clean the solution, remove the flume mold and soak it in it, then wipe and rinse it.
There are various types and specifications of the flume mould, so we should select according to the actual situation of the project when we select. For example, in the construction of this project, we need a small single groove mold, then we have to buy according to his requirements. If the surface of the flume mold rusts, and there are problems in the splicing process, then this kind of mold can not be purchased, because it is easy to lead to the whole prefabricated parts. Production is not standard, and prone to damage. So every time we buy, we have to go through various comparisons before we can choose to buy. The common concrete cable groove mold is made of steel. Because in the process of production, the plastic mold is relatively light and easy to move, but its production life is relatively short, so it would be more appropriate to use steel mold for processing and manufacturing, after buying the flume mold, we can wait for factory delivery.