Canal mold is a steel mold specially used for the production of canals and ditches. It is mainly used in prefabrication production. Its structure is in the form of vertical mold, which is composed of internal mold and external mold. After evenly brushing a layer of release agent in the spliced mold, the concrete can be poured. Note that the concrete used needs to be proportioned in advance with a concrete mixer according to the specified proportion and mixed evenly. After grouting, the vibrating rod needs to be used to mix the concrete slurry at a uniform speed. This step is very important for the production of trapezoidal ditch prefabricated parts, because if the vibration is not sufficient, bubbles will be left in the prefabricated parts, resulting in a layer of dense honeycomb holes on the surface, which will not only affect the appearance, but also lead to insufficient compressive capacity of trapezoidal ditch and easy collapse, After vibration, you can directly wait for its complete solidification and remove the trapezoidal ditch mold.
Conventional ditch and channel molds are prefabricated through molds to produce U-shaped ditch precast blocks. In the process of manufacturing ditch and channel molds, the production of molds shall be carried out according to the specific specifications and style drawings provided. The use of U-shaped ditch not only saves water resources, but also is very helpful for modern agriculture or construction. According to the use method and manufacturing content of U-shaped ditch mold, many U-shaped ditch precast blocks are U-shaped, and rectangular or trapezoidal styles are used in some areas. Therefore, Baoding Laihe prefabricated u-ditch mould factory has always adhered to the exquisite and advanced mould making technology and high-quality raw materials. The product quality is reliable, the price is reasonable and the model can be customized
During the construction of ditch and channel mould, it can design the appropriate size according to the requirements of the drawings, ensure that the manufactured parts can meet the actual requirements of the products, meet the production standards, and make the quality and effect of the products meet the satisfaction of customers. The practicability of this kind of mould is relatively high. We all know that in the manufacturing industry, if you want an enterprise to operate normally, it is necessary to produce qualified products, and the production speed should keep up. Now, it is generally produced in large quantities, so the previous traditional production mode is gradually backward. In the era of the rise of molds, Manufacturers use molds to manufacture parts and then carry out production, which can not only ensure the rapid and smooth construction, but also save a lot of raw materials for manufacturers, which is worthy of promotion.