The prefabricated parts produced by U-groove mold mainly play a role of drainage, which can make the water on the road have a good direction. In real life, we can often see that the use of roadside U-groove is very common, the use of U-groove mold is also very common, the manufacturers of U-groove mold pay attention to the quality of the mold, at present, the quality of the mold is everyone's concern, good U-groove mold will certainly have a good market. The U-channel steel mold is made of high-quality plate steel, which is easy to disassemble and quick to take out. It can be designed and manufactured according to the drawing. The main function of U-shaped groove mold: it can drain water and make the water on the road have a good direction. The mold design of U-shaped groove is reasonable, which is very suitable for agricultural reclamation and water conservancy construction. The shape is U-shaped, middle water flow, or electricity For cable laying, the cement U-shaped groove is formed by plastic mold and steel plate mold. The vibration of the lower part of the vibration platform or the internal vibration of the vibration rod can be used. The mold is coated with oil and release agent, which is conducive to mold removal. The field production industry is very convenient.
The field of using U-shaped groove mold is concentrated in railway engineering construction. Because cable trough precast block has exclusive use area, when centralized manufacturing cable trough, it often pays attention to the mold production, such as the drain hole size and alignment required by the drawing. Although there are many shapes of cable tray prefabricated blocks, steel mold can be used to complete the task of prefabricated production. The thickness of the plate used in the cable trough mold is directly related to the length of the prefabricated block, because the length determines whether to use thin and thick plate, which determines the production cost. The use of U-groove mold can effectively meet the needs of cable laying protection. At present, the U-groove mold is basically a cuboid design, which requires us to select the mold according to the size of the hole diameter.